ASCO 230 Series automatic Transfer Switch consists of an intelligent controller and a modular load break switch which automatically transfers the load to the emergency power source in the event it detects the normal power source under / over voltage, under / over frequency, or phase loss.

The Switch has three operational positions (Source I, Center – off, Source II). The two sources are isolated when the switch is in the center-off position. A Center-Off position locking mechanism is also provided.

ASCO 230 Series Product Range:

Low Voltage Automatic Transfer Switch

• Transfer switching mode for “Open Transition”,
• Switching Mechanism available for Automatic, Manual, and remote operation.
• Rated from 208 up to 415VAC, for both 50 & 60 Hz.
• Available for Single & Three Phase.
• Current capacities of 16 through 800 amperes.
• Compliant Standards include:
  • Qualified and Certified to IEC 60947-6-1, Version 2005, Revision 2 ;Class PC, AC-33B

 Catalogue “ASCO 230 Series Low Voltage Power Transfer Switch”

   Kindly contact us for more info

ASCO’s Automatic Transfer Switches are the standard of the industry. Instantaneous transfer of loads between alternate sources of power, regardless of ampacity size, is achieved by a reliable, field proven single solenoid operating mechanism.

When combined with microprocessor controls it offers the most advanced method of transferring motor loads available today. It is the only true double throw, inherently interlocked transfer switch and is available in a varieties broad range of sizes together with the largest selection of optional accessories available anywhere.

ASCO provides the solutions to handle the transfer of critical loads to emergency sources reliably and with state of the art products. As nowadays, quality and reliability of electrical power, Interruption or complete loss of power can create serious and even crippling financial losses, or impose dangers to life and safety.

That’s why the ASCO 7000 Series is available in the conventional, two-position transfer configuration plus closed or delayed transition modes of operation. Additionally, switched or overlapping neutral options provide for reliable operation of ground fault protection systems and reduction of voltage transients from unbalanced load switching.

ASCO automatic Transfer Switches are the first CE Marked, Qualified and Certified to IEC 60947-6-1 Compliant and Kema Keur marked Automatic Transfer Switch in the world beside UL Listed to 1008 & 1008A Transfer Switch Equipment.

By using ASCO products can mean the difference between a minor inconvenience and a major catastrophe.You’ll find ASCO Automatic Transfer Switches wherever there is a critical load to be protected.

Low Voltage Power Transfer Switch

• Transfer switching mode option included “Open Transition”, “Delayed Transition”, “Close Transition” & “Soft Load Operation”
• Switching Mechanism available for Automatic, Manual, and remote operation.
• Bypass Isolation Switches available in “Open Transition”, “Delayed Transition” and “Close Transition” Design.
• Rated up to 600VAC, for both 50 & 60 Hz.
• Available for Single & Three Phase.
• Current capacities of 30 through 4000 amperes.
• Compliant Standards include:
  • Qualified and Certified to IEC 60947-6-1, Version 2005, Revision 2 ;Class PC, AC-33A
  • UL Listed per UL 1008 – Standard for Transfer Switches Equipment
  • CSA Certified to CSA 22.2 No 178-1978 – Automatic Transfer Switch

Click the Picture to Download Catalogue “ASCO 7000 Series LV Power Transfer Switch – Business Critical Application”

Click the picture to Download Catalogue “ASCO 7000 Series Soft Load Power Transfer Switch”

   Kindly contact us for more info

• Transfer switching mode option included Open Transition, Delayed Transition, and Close Transition.
• Switching Mechanism available for Automatic, Manual operation.
• Rated at 3.6KV or 12KV,
• Current capacities of 630 through 2500 amperes.
• Interrupt capacity options for an assembly include 25, 31.5 KA classes (KAIC).
• Compliant Standards include:
  • GB 3906 (eq to IEC 62271-200) – Standard for Metal-enclosed Switchgear and Controlgear.
  • GB/T 11022 (eq to IEC 60694) – Common Specifications for High-voltage Switchgear and Controlgear

  ---

   Catalogue “ASCO 7000 Series IEC Medium Voltage Power Transfer Switch”

     Kindly contact us for more info

• Transfer switching mode option included Open Transition, Delayed Transition, and Close Transition & Soft Load Operation.
• Switching Mechanism available for Automatic, Manual operation.
• Rated at 5KV or 15KV,
• Current capacities of 630 through 3000 amperes.
• Interrupt capacity options for an assembly include 25, 40, or 50 KA classes (KAIC).
• Compliant Standards include:
  • UL Listed per UL 1008A – Standard for Medium Voltage Transfer Switches
  • ANSI/IEEE C37.20.2 – Standard for Metal-Clad Switchgear
  • ANSI/NEMA C37.55 – Switchgear Medium Voltage Metal Clad Assemblies Conformance Test Procedures.

     

     

    
    

    ---

    Catalogue “ASCO 7000 Series Medium Voltage Power Transfer Switch”

       Kindly contact us for more info

ASCO Froment Load Bank	ASCO Avtron Load Bank

   For more info click here
   Kindly contact us for more info

  For more info click here
   Kindly contact us for more info

ASCO 7000 Series Generator Paralleling Control Switchgear

Catalogue “ASCO 7000 Series Generator Paralleling Control Switchgear”

  For more info click here
   Kindly contact us for more info

ASCO Panelmount (Facility – Wide) Surge Protection

Catalogue “ASCO Panelmount (Facility Wide) Surge Protection”

   Kindly contact us for more info

Genergy Battery Co. Limited aims to be one of the highest quality suppliers of Industrial batteries in the world. It is also the exclusive overseas sales and marketing company of Flying Power Group, in charge of Europe, Middle East, Africa and Asia markets. After years of steady growth, the factory is now operating out of a 300,000 square meter manufacturing facility. The state-of the–art factory produces over 100,000 tons of plates and has over 5 million KVA of battery output in 2015.

 In compliance with IEC60896-21/22 and approved by ISO 9001, ISO 14001 and OHSAS 18000, Genergy products represent the highest quality product range available from the factory, and its global appeal is becoming more and more recognized.

To achieve the highest standard, Genergy is building a global network of quality partners and customers. With this in mind, Genergy has now opened Sales and Technical support offices worldwide, with industrial experts and talented engineers for EMEA strategic projects.

It is Genergy’s aim to, not only produce high quality and economic products that are fully compliant with International standards, but to also provide excellent service in both the pre-sales and post sales periods.

Genergy has also an extensive product development plan that will engage with our closest partners to create the product road map to counter everything the market throws at us. In today’s world, batteries must operate in the most challenging and diverse applications and environments, and Genergy has a full and extensive range that covers all options. Why not join the Genergy journey? We are about to travel far and wide in the global standby power market.

Genergy Battery Product Range:

1)Sealed Lead Acid Battery – Standby Application

Click the picture to download catalogue Genergy Battery – Standby Application

2)Sealed Lead Acid Battery – Solar Applications

Click the picture to download catalogue Genergy Battery – Solar Application

3)EV AGM Series – Electric Vehicle Battery

Click the picture to download catalogue Genergy Battery – Standby Application